8618831832367
pauleen@meshwiresuppliers.com
enLanguage
Advanced Search

Solar Panel Bird Guard

First 1234567 Last

 

 
 
Advantages Of Solar Panel Bird Guard
01.

Mitigating damage to Solar Mesh

If solar panels are not bird-proofed, the panels can be damaged by nesting materials, bird droppings and pecking. If left unchecked, this can reduce the efficiency of the solar panel

02.

Cost-effective Maintenance

Cleaning and fixing damage caused by birds regularly can be expensive. Solar panel bird guard saves time and money in the long run by reducing the need for frequent maintenance.

03.

Promotion Of Bird Conservation

Bird-proofing techniques are designed to deter birds without causing harm. This promotes the well-being of local bird populations by encouraging them to find alternative nesting sites and habitats

04.

Increasing the life of solar panels

By limiting the mileage brought about by birds, Solar panel bird guards the life expectancy of sunlight-powered chargers. 

 

What problems do birds cause with roofs?
 

Damage To The Solar Panels
Nesting birds can disrupt wiring or damage components essential to the functionality of the solar panels, reducing their output.

 

Damage To The Solar Panels
Birds are a sloppy bunch. The accumulation of nesting materials and theaforementioned acidic excrement can create an unsightly mess on rooftops.Regular cleaning is a must, otherwise you'll end up with clogged guttersand drains.

 

Noise Disturbance
If you've ever had the pleasure of being rudely awakened by pigeons squaring up to each other at the crack of dawn, you'll understand just how disturbing bird noises can be, especially when they're busy building nests on the roof above you.

 

Rooftop Mess
Birds are a sloppy bunch. The accumulation of nesting materials and the aforementioned acidic excrement can create an unsightly mess on rooftops. Regular cleaning is a must, otherwise you'll end up with clogged gutters and drains.

 

How To Install Solar Panel Bird Guard？
 
Step 1: Gather the Necessary Tools

Before you start bird-proofing your solar panels, gather all the tools you'll need for the job. Here's a list of essential tools:
● Measuring tape
● Wire mesh 
● Clips for securing the mesh
● Cable ties
● Wire cutters
● Pliers (needle-nose or larger)
● Safety gloves
● Knee pads
● Extra rope
● Safety harness
● Tool bag for convenience
Make sure you have all these tools ready before heading up to the roof.

Step 2: Measure and Cut Wire Mesh

Begin by measuring the area you need to cover with the wire mesh. Cut the wire mesh into appropriate lengths, typically 5-foot or 10-foot strips, using snips or wire cutters. Make sure you have the correct dimensions to match your solar panel layout.

Step 3: Bend and Prepare Wire Mesh

To make the wire mesh more sturdy and secure, you'll need to bend it. Follow these steps to prepare the wire mesh:
● Bend the top edge of the mesh to create a flange. You can use a two-by-four or a similar object for leverage.
● Bend the flange down to create a double layer on the top edge of the mesh.
● To create corners, bend the mesh at a 90-degree angle.
● This preparation ensures the wire mesh fits snugly and securely on your solar panels when you're on the roof.

Step 4: Start Pressure Washing

Before installing the wire mesh, it's crucial to clean the solar panel area thoroughly to remove any bird droppings, feathers, and debris. Here's how to pressure wash the area:
● Begin spraying water under the solar panels, targeting the space between the panels and the roof.
● Make sure to clean the undersides thoroughly, causing debris to fall to the ground.
● Be cautious not to spray the tops of the panels.
● Cleanliness is vital for an effective bird-proofing job.

Step 5: Prepare Safety Gear

Once the cleaning is complete, it's time to prepare for the installation. Ensure your safety by putting on the necessary gear:
● Wear safety gloves and knee pads to protect yourself while working.
● Use a safety harness to prevent any accidents while on the roof.
● Attach a 25-foot measuring tape to measure the mesh strips accurately.
● Calculate the length needed for each strip, accounting for the width and depth of the solar panels.

Step 6: Measure and Cut Wire Mesh Strips

Measure the required length for each wire mesh strip, ensuring they're slightly longer to go around the corners of your solar panels. Cut the strips accordingly.

Step 7: Install Wire Mesh

With the mesh strips prepared, it's time to start the installation. Follow these steps:
● Climb onto the roof and position the wire mesh strips on top of the solar panels.
● Secure the mesh by bending it over the edges of the panels and use clips, cable ties, or tie wraps to fasten it in place.
● Ensure the mesh fits tightly around the edges, leaving no gaps.

Step 8: Complete the Installation

Continue securing the wire mesh around the corners of the solar panels until all panels are covered. Make sure everything is tightly secured and that there are no open spaces where birds could nest.

 

Why Choose Us?

Quality Assurance

We have professional quality control system to ensure correct size and high quality products. We can do 100% factory inspection.

Experienced In Exporting

We have ten years of experience in exporting, our main overseas markets are Europe, North America, Middle East and Southeast Asia.

OEM/ODM Service

Our company provides OEM and ODM service for customers.

 

24-Hour Online Service

Whatever concerns or questions you have, our service team will get back to you quickly and efficiently.

 

 

 
Our Factory

 

Hebei Pauleen Metal Products Co., Ltd. is a company specialising in the production of metal products and is one of the country's leading manufacturers with our factory occupies 43,000 square meters. Our speciality product is the solar panel bird mesh and clip, which is developed to effectively prevent birds from infesting the panels, thus enabling the panels to be used for a long period of time.

 

 
 FAQ 

Q:Who are we?

A: Hebei Pauleen Metal Products Co., Ltd. is a leading manufacturer of high-quality metal products in China.

Q: How can we guarantee quality?

A: Always a pre-production sample before mass production;
Always final Inspection before shipment;

Q: Can I customize the products?

A: Yes, we support customization. If you have any requirements you can contact us anytime.

Q: Can you offer free sample?

A: Yes,Hebei Pauleen can offer you high quality free sample.

Q: Are you a manufacturer?

A: Yes, We have been providing specialized products in the metal products industry for over 10 years.

Q: Why should you buy from us not from other suppliers?

A:We have been engaged in the production of metal industry for ten years, the quality of our products is guaranteed, we also have our own factory, so the price is cheap, cost-effective, cooperate with us can reduce your cost.

Q: How about the delivery time?

A: Usually within 25-30 days , customized order may need longer time.

We're well-known as one of the leading wire mesh manufacturers and suppliers in China. New century, new challenges and opportunities. We wil continue to innovate and provide you with high quality products and competitive price.